Ok im gonna walk you through installing speakers in a 2000 & up cheveolet Truck, Suburban, Tahoe. Ok

Tools Needed:
1. Screw driver (philip) (flat head)
2. Wire strippers
3. Drill

Time :
About 1hour

Red = Pull off with clips
Blue = Screws


1. Pull this off [not door handel but the piece behind it]
1. Remove the screw behind that piece
2. Pull this off and unplug your wires
2. Remove the screw behind door grip
3. Pop this out
4. Remove the screw on bottom of the door
4. Pull this up and it pops out
5. Pull this off
6. Pop this light out and pop the lightbulb out

Now just pull up on the door frame and it should come off.




Ok this is what your door should look like now.. So pop out your speakers and drill holes (If needed for your speakers) then strip your wires back does not matter what wire goes to what on the speaker they work fine. then put you door back on with the steps.